Aluminum Alloy Ingot
About Products
| General Features | |
| Name, Symbol, Number | Aluminum, Al, 13 |
| Chemical Series | P-block elements |
| Group, Period, Block | 13, 3, p |
| Standard atomic weight | 26.9815386(13) g·mol-1 |
| Electron Configuration | [Neon] 3s2 3p1 |
| Top of the skeletal electron | 2, 8, 3 |
| Physical Features | |
| Stage | Solid |
| Original weight (close to room temperature) | 2.70 g·cm-3 |
| The original weight in liquid Melting point | 2.375 g·cm-3 |
| Melting point | 933.47 K (660.32 °C, 1220.58 °F) |
| Boiling Point | 2792 K (2519 °C, 4566 °F) |
| Heat of fusion | 10.71 kJ·mol-1 |
| Evaporation Temperature | 294.0 kJ·mol-1 |
| Heating Capacity | (25 °C) 24.200 J·mol-1·K-1 |
| Various Features | |
| Magnetic Order | paramagnetic |
| Electrical impedance | (20 °C) 26.50 n?·m |
| Thermal Conductivity | (300 K) 237 W·m-1·K-1 |
| Thermal expansion | (25 °C) 23.1 µm·m-1·K-1 |
| Speed of sound (thin rod) | (at room temperature. · 5000 m s-1 (one meter per second) |
| Young Coefficient | 70 GPa |
| Cutting Coefficient | 26 GPa |
| Volume Coefficient | 76 GPa |
| Poisoning Rate | 0.35 |
| Mohs Enforcement | 2.75 |
| Brinell Hardness | 167 MPa |
| CAS Registation Number | 245 MPa |
| Magnetic Order | 7429-90-5 |
The norms of our products alloy Etial checks are done routinely (FAUNDRY optical emission spectrometer). Casting a second order analysis of quality control during the assessment of quality verification is provided.
However, our desired norm-alloy ingot production is also available.
| ETİNORM | CHARACTERISTICS AND USE PLACES |
| ETİAL-110 | Good casting, welding characteristics can, Cylinder head combustion engine crankshaft caps |
| ETİAL-120 | Kitchen utensils, food handling equipment, marine fittinggleri various thin-section castings. |
| ETİAL-140 | Thin sections and intricate castings, engine boxes, metering boxes, pump parts, marine atmosphere. |
| ETİAL-141 | Mixed and thin-walled pressure castings. |
| ETİAL-145 | Casting mold and sand castings, pistons and other engine parts. |
| ETİAL-147 | Casting castings iron base. |
| ETİAL-150 | Pressure die casting is used in high strength. |
| ETİAL-160 | Require good surface is used in pressure casting. |
| ETİAL-171 | Require good surface is used in pressure casting. |
| ETİAL-175 | Is resistant to hot cracking is very good fluidity. Used in internal combustion piston engines. |
| ETİAL-177 | Automotive industry, basınçda seal. Wheels are used in the construction. |
| ETİAL-180 | The wide field of use, general-purpose exercise mine. Is used in pressure die casting. |
| ETİAL-195 | In the manufacture pistons, cylinder blocks are used in internal combustion engines. |
| ETİAL-220 | Casting in sand and casting, gear box is used. |
| ETİAL-221 | In the casting mold Casting, sand and general engineering applications, are used in cold sores. |
| ETİAL-509 | Corrosion resistant cast housing kitchen and office machinery, optical instruments, decorative molding and casting parts. |
Assortment
| ETİNORM | COLOR CODES | FE | Sİ | CU | MN | MG | ZN | Nİ | Tİ | PB | SN | |
| ETİAL – 110 | Blue | Blue |
0,70
|
4,00 – 6,00
|
2,00 – 4,00
|
0,20 – 0,60
|
0,15
|
0,20
|
0,30
|
0,20
|
0,10
|
0,05
|
| ETİAL – 120 | White | Blue |
0,50
|
4,50 – 6,00
|
0,10
|
0,20
|
0,10
|
0,10
|
0,10
|
0,20
|
0,10
|
0,10
|
| ETİAL – 140 | Yellow | Yellow |
0,60
|
11,50 – 13,50
|
0,10
|
0,40
|
0,10
|
0,10
|
0,10
|
0,15
|
0,10
|
0,05
|
| ETİAL – 141 | Green | Yellow |
1,00
|
11,50 – 13,50
|
0,20
|
0,30
|
0,20
|
0,10
|
0,10
|
0,15
|
0,10
|
0,05
|
| ETİAL – 145 | Red | Yellow |
0,60
|
11,00 – 13,00
|
0,80 – 1,50
|
0,20
|
0,80 – 1,40
|
0,20
|
0,80 – 1,30
|
0,10
|
0,10
|
0,05
|
| ETİAL – 147 | Black | Yellow |
0,25
|
8,70 – 9,10
|
3,40 – 3,70
|
0,20
|
0,40 – 0,80
|
0,20
|
0,20
|
0,10
|
0,10
|
0,05
|
| ETİAL – 150 | Blue | Green |
1,00
|
11,00 – 13,00
|
1,75 – 2,50
|
0,50
|
0,40
|
0,70
|
0,30
|
0,15
|
0,10
|
0,10
|
| ETİAL – 160 | Green | Green |
1,00
|
7,50 – 9,00
|
3,00 – 4,00
|
0,50
|
0,30
|
1,00
|
0,20
|
0,20
|
0,10
|
0,10
|
| ETİAL – 171 | Blue | Black |
0,50
|
9,00 – 10,00
|
0,10
|
0,40 – 0,60
|
0,30 – 0,45
|
0,10
|
0,10
|
0,15
|
0,05
|
0,05
|
| ETİAL – 175 | Black | Black |
0,60
|
9,00 – 10,50
|
2,50 – 3,50
|
0,30
|
0,70 – 1,20
|
0,50
|
0,30
|
0,15
|
0,10
|
0,05
|
| ETİAL – 177 | Red | Green |
0,20
|
6,60 – 7,40
|
0,02
|
0,03
|
0,30 – 0,45
|
0,04
|
0,02
|
0,08 – 0,14
|
0,05
|
0,05
|
| ETİAL – 178 | Green | Black |
0,40
|
5,00 – 5,50
|
2,80 – 3,20
|
0,10 – 0,20
|
0,15 – 0,25
|
0,50
|
0,30
|
0,15
|
0,10
|
0,05
|
| ETİAL – 180 | White | Black |
1,00
|
9,00 – 11,50
|
0,70 – 2,50
|
0,50
|
0,30
|
2,00
|
0,50
|
0,20
|
0,10
|
0,20
|
| ETİAL – 195 | Red | Black |
0,60
|
17,00 – 19,00
|
0,80 – 1,50
|
0,20
|
0,80 – 1,30
|
0,20
|
0,80 – 1,30
|
0,10
|
0,10
|
0,05
|
| ETİAL – 220 | Blue | White |
0,30
|
0,35
|
4,00 – 5,00
|
0,10
|
0,10
|
0,10
|
0,10
|
0,05
|
0,05
|
0,05
|
| ETİAL – 221 | Yellow | White |
0,30
|
0,30
|
4,00 – 5,00
|
0,10
|
0,05
|
0,10
|
0,10
|
0,15 – 0,30
|
0,05
|
0,05
|
| ETİAL – 222 |
0,60
|
1,00
|
0,05
|
0,2 – 0,5
|
7 – 10
|
0,10
|
-
|
0,15
|
-
|
-
|
||
Frequently Asked Questions
TS 435 Nedir
Elektrolitik Bakırdan Toplayıcı Çubuklar
Ürünlerinizde Verilen Standart Boylardamı Üretim Yapıyorsunuz
TS 435, DIN 1759 ve DIN 46433 Standartlarına uygun olarak üretilen elektrolitik bakır lamalar, genelde 3m. boylarda olup isteğe bağlı olarak farklı boylarda da üretilebilmektedir.
English
Español
Deutsch
Italiano
Русский
Türkçe